Pavone Sistemi DAT 400稱重變送器
Pavone Sistemi DAT 400稱重變送器產品資料：
意大利Pavone Sistemi DAT 400稱重變送器技術參數：
| Trasducer input voltage: | 5 V (max 6 load cells 350 Ohm) |
| Measuring range: | -0.5 ÷ +3.5 mV/V (-3.9 ÷ +3.9 mV/V optional) |
| Input sensitivity: | 0.02 microV/division |
| Linearity: | < 0.01% FS |
| Gain, drift: | < 0.001% FS/ °C |
| Display: | 6 digit, red LED (7 segments), h 14 mm |
| LED status: | 4 red |
| A/D Converter: | 24 bit |
| Resolution: | > 16.000.000 counts |
| Visible resolution: | 60.000 divisions displayable on net weight |
| Divisions value (adjustable): | x1, x2, x5 |
| Decimal: | 0.0 ; 0.00 ; 0.000 |
| Filter: | 0.1÷25 Hz adjustable |
| Keyboard: | 4 tactile feedback buttons |
| Tool voltage: | 24 Vcc ±15% - power 5 W |
| Temperature range: | -10 ÷ +50 °C |
| Storage Temperature: | -20/+70°C |
| Logic output: | 2 relays (clean contact) MAX 24 Vcc/100 mA cad. |
| Logic input: | 2 optoisolated 24 Vcc PNP (External voltage) |
| Serial door: | USB, RS232C o RS422/RS485 with ASCII or Modbus RTU protocols |
| Transmission distance: | 15m (RS232C), 1000m (RS422 e RS485) |
| FIELDBUS protocol: | PROFIBUS, DEVICENET (optional) |
| Others fieldbus comunication: | CANopen, Modbus-Plus and other |
| Peak Hold function: | only for dynamics measures |
| Baud rate: | 2400, 9600, 19200, 38400, 115200 adjustable |
| Analog output optional: | optoisolated 16 Bit Tension: 0÷5/10 V (R min10 K Ohm), Current: 0/4÷20 mA (R max 300 Ohm) |
| Regulatory compliance: | EN61326-1, EN55011 and EN55014 for EMC; EN61010-1 for electrical security |
| Electrical connection: | Screw terminals 5 mm |
| Dimensions and weight: | 106 x 90 x 58 mm (L x H x P); 250 g |
| BCD output: |
optional |
意大利Pavone Sistemi DAT 400稱重變送器面板尺寸（MM）：
Pavone Sistemi DAT 400稱重變送器，亦可用于傳感器認證的標定。Pavone DAT 400 Pavone DAT 400/A
